Barix Exstreamer 120

Barix

Overview

Manufacturer:    Barix
SKU: 2010.9102 Category: Tag

The Barix Exstreamer 120 is a popular IP audio Decoder device used to convert (decode) IP audio streams. The Exstreamer 120 is widely used within commercial audio installations to decode IP audio for connection and playout through traditional low ohms and 100v commercial audio system equipment.

The Barix Exstreamer 120 can be configured to be used in both SIP and Non-SIP network communication environments.

£229.50 ex.VAT (£275.40 inc.VAT)

Product Details

Outline

The Barix Exstreamer 100 range of devices are IP audio decoders that convert IP audio streams into traditional analogue audio to create various commercial audio designs and applications. The Exstreamer 120 is the enhanced model version (with display and relay), with microSD memory. Barix Exstreamer devices are used to connect and integrate IP audio streams to traditional audio system devices such as mixers and other similar audio processing / amplification equipment.

Use the Barix Exstreamer to decode audio streams from an IP audio source (eg. Internet Radio, IP music, IP paging, public address (pa) / tannoy Background Music (BGM) or SIP IP telephony. The audio output from the Exstreamer 100 is connected and used for playout through traditional low ohms or 100v line commercial audio system equipment and speakers.

Abletek Note: We have installed Barix Exstreamer devices within many of our own commercial audio projects. Typically we use these devices in partnership with the Barix Instreamer (IP audio encoder) to route and extend 100v line audio within large buildings, between buildings and even between different sites. We also regularly use Exstreamers as an independent audio source into audio equipment for playout of IP microphone, SIP telephony and Internet radio audio streams.

Key Features

  • Browser based GUI for admin, config and control
  • Line level audio output via stereo RCA sockets
  • AACplus, MP3, Ogg Vorbis, G.711, PCM Decoding
  • IP Streaming via HTTP, TCP, UDP, RTP, Multicast
  • RS-232 Serial Port
  • Supply Voltage (9..30VDC, 12..24VAC)
  • USB/µSD card Interface
  • One low-voltage Relay (on Exstreamer 110 & 120 only)
  • Remote control and built-in IR receiver (on Exstreamer 110 & 120 only)

Exstreamer Model Comparison:

Exstreamer 100 Memory USB, IR use kit
Exstreamer 105 Memory MicroSD, IR use kit
Exstreamer 110 Display 2×16, Memory USB, with integrated relay
Exstreamer 120 Display 2×16, Memory MicroSD, with integrated relay

Why Barix Exstreamer?

The Barix Exstreamers are manufactured within a solid housing. They are fully featured IP audio decoders used extensively within commercial audio installations offering:

  • IP audio routing / distribution (decoder)
  • Multiroom IP Audio System Receiver
  • Instore Audio Player
  • Internet Radio Receiver
  • SIP and IP Paging Zone Device
  • Digital Annunciator, Message Player, Message Repeater
  • Generic VoIP decoder for IP Paging and announcement applications
  • Commercial Audio Streaming Application

Electrical

  • 9 to 30 VDC, 12 to 24 VAC, 6 Watt max
  • 2.1mm barrel connector Ethernet
  • 10/100Mbps Auto-negotiation
  • RJ-45 connector with integrated Link/Activity LED
  • Protocols: TCP/IP, HTTP, UDP, RTP, SIP, DHCP, SNMP, Multicast capable, webserver for control, status and configuration

Analog Output

  • Line level output, 40..60 Ohm impedance on RCA and 1/8” headphone jack
  • Output level software controllable
  • Full scale output voltage: 5.6 dBu, 4 Vpp
  • Frequency response (-3dB) 19Hz..20kHz
  • Signal to Noise Ratio 87 dB *, THD <0.05% *

Discrete I/O

  • 1 Relay 24V 0.5A (normally open, 110 & 120 models only)

Audio Formats

  • MP3 CBR/VBR, up to 320 kbps, 8..48kHz sample freq.
  • AAC-HE (AAC, AAC plus, AAC plus V2)
  • Ogg Vorbis, WMA (up to version 9)
  • PCM (L16, uLaw, aLaw), 8..48 kHz sample freq.
  • G.711

IR Interface

  • Built-in IR receiver and IR remote control included with Exstreamer 110 & 120 models only
  • Optional external IR receiver via serial port (IR Kit) RS-232 Interface
  • Male 9-pin Sub-D connector
  • 300..230‘400 Baud asynchron., tunneling or local control
  • 12 VDC supply output for external device (100 mA max.)

Miscellaneous

  • Green and red LED for status display
  • Button for reset and factory defaults
  • USB port (100 & 120 models only)
  • MircoSD card slot (105 & 120 models only)

Display

  • Backlit LCD, 2×16 chars (110 & 120 models only)

Mechanical

  • Aluminum case, 250g
  • Rack and wall mountable using accessories

Dimensions (W x H x D)

  • W x H x D: 108 x 38 x 78.7mm (4.25 x 1.5 x 3.1 inch)

MTBF (Calculated acc. MIL217F at 25°C)

  • Exstreamer 100 : min. 480 000h
  • Exstreamer 105 : min. 460 000h
  • Exstreamer 110 : min. 450 000h
  • Exstreamer 120 : min. 430 000h

Links & Downloads

Manufacturer and product information changes regularly.
For latest Barix product information and development, please visit:

Downloads

No direct downloads.